Passenger Side Knee Bar

Passenger Side Knee Bar






1 Central Tube

2 Bolt

9 Nm

3 Right Knee Bar

• Removing

- Remove glove compartment, refer to => [ Glove Compartment ] Glove Compartment.

- Remove Right Vent Temperature Sensor (G151) => [ , removing and installing ].

- Remove bolts - 2 - and - 4 -.

- Remove knee bar on central tube - 1 -.

• Installing

To install, perform the steps used in removal in reverse order.

4 Bolt

9 Nm

5 Left Knee Bar

• Removing

- Remove glove compartment, refer to => [ Glove Compartment ] Glove Compartment.

- Remove bolts - 6 - and - 7 -.

- Remove knee bar on central tube - 1 -.

• Installing

To install, perform the steps used in removal in reverse order.

6 Bolt

9 Nm

7 Bolt

9 Nm

Right Vent Temperature Sensor (G151), removing and installing





Removing

- Rotate Right Vent Temperature Sensor (G151) - item B - 90° in - direction of arrow -.

- Remove Right Vent Temperature Sensor from air duct.

• The electronic connector - A - must not be disconnected.

Installation

Installation is reverse of removal, but note the following:

- When rotating Right Vent Temperature Sensor (G151), ensure sealing ring - C - is not pinched.