Sill Panel Strip

Sill Panel Strip






1 Sill Panel Trim

Removing

- Remove lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Unclip spring clips - 5 - on front and rear sill panel strip - 1 - from sill - 3 -.

- Open tab - 6 - and remove seat belt from sill panel strip.

- Unclip sill panel strip from lower B-pillar trim - 2 -.

- Remove sill panel strip upward.

Installation

Installation is reverse of removal, but note the following:

• Replace spring clips if damaged.

- Install lower A-pillar trim. Refer to => [ Lower A-Pillar Trim ] Lower A-Pillar Trim.

- Make sure the floor cover is clamped under sill panel strip without wrinkles.

- Pull rubber lip of door seal - 4 - over edge of sill panel strip.

2 Lower C-pillar Trim

3 Sill

4 Door Seal

5 Spring Clips

• Replace if damaged

6 Belt Guide