Mirror Housing

Mirror Housing






1 - Mirror Housing

• Removing:

• Remove bolts - 4 - from cover trim - 3 - and remove them downward.

• Release housing from locking tabs on mirror adjusting unit and remove it upward.

• Installing:

• Position mirror housing onto mirror adjusting unit - 2 - from above.

• While doing so, locking tabs - arrows - in mirror adjusting unit must engage above and below.

2 - Mirror Adjusting Unit

3 - Lower Trim Strip

4 - Combination Screw

• 1 Nm

Lower Mirror Locking Tab





- When installing, locking tab (- arrow A -) of mirror adjusting unit - 2 - must be inserted into mirror housing catches - 1 - in direction of arrow.