Diagram 74/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Brake pressure sensor 1, ABS control module, Headlamp range control module, Steering column electronics control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G201 - Brake pressure sensor 1 Locations

J104 - ABS control module Control Modules in Front Part Of Vehicle

J431 - Headlamp range control module Control Modules in Interior Of Vehicle

J527 - Steering column electronics control module Control Modules in Interior Of Vehicle

J533 - Data bus on board diagnostic interface Control Modules in Interior Of Vehicle

T20b - 20-pin connector

T20d - 20-pin connector

T26a - 26-pin connector

T26b - 26-pin connector

(390) - Ground connection 25 (in main wiring harness)

(392) - Ground connection 27 (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

* - Only for left-hand drive vehicles

*2 - Depending on equipment

*3 - Only for vehicles with dynamic cornering lamp

*4 - If available

*5 - Only for right-hand drive vehicles

Previous Diagram 74/6 (Tracks 57-70)

Next Diagram 74/8 (Tracks 85-98)