Diagram 68/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Throttle Valve Control Module, Knock Sensors (KS), Temperature Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G61 - Knock Sensor (KS) 1 Locations Knock Sensor 1 -G61-

G62 - Engine Coolant Temperature (ECT) Sensor Locations Engine Coolant Temperature Sensor -G62-

G66 - Knock Sensor (KS) 2 Locations Knock Sensor 2 -G66-

G186 - Throttle Drive (for Electronic Power Control (EPC)

G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC)

G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC)

J220 - Motronic Engine Control Module (ECM) Control Modules in Front Part Of Vehicle

J338 - Throttle Valve Control Module Locations [1][2]Diagrams

T2f - Double Connector, black, in left engine compartment (knock sensor 2)

T3 - 3-Pin Connector, red, in left engine compartment (knock sensor)

T6d - 6-Pin Connector, black, near throttle valve control module

T121 - 121-Pin Connector, black, on engine control module (ECM)

(139) - Sensor Ground Connection (in Motronic Multiport Fuel Injection (MFI) wiring harness)

(220) - Sensor Ground Connection (in engine wiring harness)

Previous Diagram 68/16 (Tracks 197-210)

Next Diagram 68/18 (Tracks 225-238)