Diagram 58/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Outside air temperature sensor, Windshield washer fluid level sensor, Fuel level sensor 2, Instrument cluster control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil pressure switch Locations

G17 - Outside air temperature sensor Components Outside Pass Compartment - Group 1

G33 - Windshield washer fluid level sensor

G106 - Outside air temperature display Components Inside Pass Compartment - Group 1

G169 - Fuel level sensor 2 Locations Fuel Level Sensor 2 -G169-

H3 - Warning buzzer and tone

J285 - Instrument cluster control module Control Modules in Interior Of Vehicle

K3 - Oil pressure indicator lamp

K32 - Brake pad wear indicator lamp

K102 - Rear lid -closed- indicator lamp

T14 - 14-pin connector, near the left front longitudinal member

T32 - 32-pin connector

(393) - Ground connection 28 (in main wiring harness)

(401) - Sensor ground connection (in interior wiring harness)

* - Only for vehicles with all wheel drive

*2 - Refer to applicable engine wiring diagram

Previous Diagram 58/3 (Tracks 15-28)

Next Diagram 58/5 (Tracks 43-56)