Audi Magnetic Ride Front Shock Absorber, Venting and Emptying

Audi Magnetic Ride Front Shock Absorber, Venting and Emptying

- Clamp magnetic ride shock absorber vertically in a vise.







Wear protective goggles while drilling.

- Drill a 3 mm hole - arrow A - through the shock absorber outer tube.

• Gas escapes when drilling.

- Drill a second hole 6 mm - arrow B - through the shock absorber outer tube.

- Hold shock absorber over appropriate container for catching oil and move piston rod repeatedly through the entire stroke until no more oil flows out.