Selector Lever Scale Illumination Bulb (L101)

Selector Lever Scale Illumination Bulb (L101)

Removing

- Move the selector lever into "N".

- Turn off the ignition and remove the key.

- Remove the frame for the selector lever boot - 1 - - arrows -.





- Fold up the selector lever boot.

- Remove the cover for the selector lever - 1 - from the middle console and lift this upwards - arrows -.





- Remove the selector lever cover.

- Disconnect the connector.

- Release the springs - arrows -.





- Remove the trim and selector lever scale illumination bulb - 2 - from the selector lever cover - 1 -.

Installation

Installation is performed in the reverse order of removal.