Diagram 147/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Powertrain CAN-Bus, Hydraulic Pressure Sensor, Gear Position Distance Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G193 - Automatic Transmission Hydraulic Pressure Sensor 1 Direct Shift Gearbox 02E (DSG)

G194 - Automatic Transmission Hydraulic Pressure Sensor 2 Direct Shift Gearbox 02E (DSG)

G487 - Gear Position Distance Sensor 1 Direct Shift Gearbox 02E (DSG)

G488 - Gear Position Distance Sensor 2 Direct Shift Gearbox 02E (DSG)

G489 - Gear Position Distance Sensor 3 Direct Shift Gearbox 02E (DSG)

G490 - Gear Position Distance Sensor 4 Direct Shift Gearbox 02E (DSG)

J... - Engine Control Modules (ECM)

J587 - Selector Lever Sensor Control Module Direct Shift Gearbox 02E (DSG)

J743 - Direct Shift Gearbox (DSG) Mechatronic Control Modules in Front Part Of Vehicle DSG Transmission Mechatronic -J743-

T16 - 16-Pin Connector, black, instrument panel driver's side, bottom left (diagnostic connector)

T20e - 20-Pin Connector, black (Connector A)

(390) - Ground Connection 25 (in main wiring harness)

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B444) - OBD Connection 1 (in main wiring harness)

* - => Applicable Wiring Diagram Engine

** - Only models with engine code CBFA

Previous Diagram 147/6 (Tracks 57-70)

Next Diagram 147/8 (Tracks 85-98)