Spray Nozzles,

Spray Nozzles,

Removing






- Switch off ignition and remove ignition key.

- Remove the nozzle from the plenum chamber cover - arrow -.

- Release the securing clip and remove the washer fluid line - 3 - from the nozzle - 1 - for the windshield washer system.






- Disconnect the electrical connector - 2 - if applicable.

Installing

Install in reverse order of removal, observing the following:

- Make sure the securing clip engages audibly in the washer line connection when connecting the line.

- Install the nozzle into the plenum chamber cover.