Headlamp Alignment Switch: Service and Repair

Headlamp Range Control Adjuster

Removing






- Remove the driver side instrument panel cover.

- Remove the instrument cluster gap cover.

- Remove the bolts - arrows - and the light switch trim - 1 -.

- Disconnect the light switch (E1) electrical connector.

• The illustration shows the light switch removed.

- Disconnect the electrical connector - 1 - from the headlamp range control adjuster (E102) by pressing the release button.






- Carefully release the retaining hooks - arrows - using a small screwdriver.

- Remove the headlamp range control adjuster - item 2 - from the light switch trim.

Installing

Install in reverse order of removal, observing the following:

- Install the light switch trim.

- Install the instrument cluster gap cover.

- Install the driver side instrument panel cover.