Radio

Radio

- Switch off all electrical consumers.

- Move the selector lever to "N" or all the way to the rear on a manual transmission vehicle.

- Remove the key.

If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine in the Vehicle Diagnostic Tester.

Removing

- Remove the A/C controls.

- Remove the center air vents above the radio (R).

- Remove the bolts on the radio - 1 - - arrows -.






- Remove the radio - 1 - from the instrument panel.

- Release connectors at radio and remove.

Installing

- Perform the installation in reverse order.

Tightening specifications, refer to => [ Radio System Overview ] Radio System Overview.