Speaker Mount

Speaker Mount

Removing






- Remove the instrument panel. Refer to => [ Instrument Panel ] Instrument Panel.

- Remove the nuts - 2 through 4 - on the bottom of the instrument panel.

- Remove the speaker mounts - 1 - and - 5 - upward from the instrument panel.

Installing

Install in reverse order of removal. Note the following:

• When tightening the nuts, make there is an even distance between the upper side of the instrument panel and the upper edge of the speaker vent as well as an even gap all the way around.

For the correct tightening specifications, refer to => [ Instrument Panel Overview ] Instrument Panel Overview.