Cable Operating Lever

Cable Operating Lever

Removing






- Pull the securing clip - 2 - out of the operating lever - 1 - slightly - arrow A - using a small screwdriver.

- Pull the operating lever back - arrow B - to release the hood and hold it in this position.

If the operating lever is pulled out crooked, the mount could be damaged.

- At the same time, pull the operating lever level with the center of the vehicle and out of the mount - arrow C -.

Installing

Install in reverse order of removal. Note the following:

- Slide the clip completely into the operating lever.

- Press the operating lever onto the mount in the mounting bracket and engage it.