High-Mount Brake Lamp and License Plate Lamps, 5-Door Assembly Overview

High-Mount Brake Lamp and License Plate Lamps, 5-Door Assembly Overview






1 Left License Plate Lamp

• Removing and installing, refer to => [ License Plate Lamps, 5-Door ] License Plate Lamps, 5-Door

2 Left License Plate Lamp Bulb (X4)

• 12V, 5 W

• Bulb, Replacing, refer to => [ License Plate Lamps, 5-Door ] License Plate Lamps, 5-Door

3 Nut

• Tightening Specifications and Sequence.

4 Small Seal

• Self-adhesive

• Replace

• For the correct seals, refer to the electronic parts catalog ETKA.

5 Nut

• Tightening Specifications and Sequence.

6 Small Seal

• Self-adhesive

• Replace

• For the correct seals, refer to the electronic parts catalog ETKA

7 High Mounted Brake Lamp

• With high-mounted brake lamp bulb (M25)

• Removing and installing, refer to => [ High-Mounted Brake Lamp Bulb, 5-Door ] High-Mounted Brake Lamp Bulb, 5-Door

8 Small Seal

• Self-adhesive

• Replace

• For the correct seals, refer to the electronic parts catalog ETKA

9 Nut

10 Small Seal

• Self-adhesive

• Replace

• For the correct seals, refer to the electronic parts catalog ETKA

11 Nut

12 Large Seal

• Self-adhesive

• Replace

• For the correct seals, refer to the electronic parts catalog ETKA

13 Nut

14 Right License Plate Lamp (X5)

• 12V, 5 W

• Bulb, Replacing, refer to => [ License Plate Lamps, 5-Door ] License Plate Lamps, 5-Door

15 Right License Plate Lamp

• Removing and installing, refer to => [ License Plate Lamps, 5-Door ] License Plate Lamps, 5-Door

Tightening specification and sequence for high-mounted brake lamp bulb (M25)





- Tighten the nut to 2.5 Nm in the following sequence - 1 to 5 -.