Alarm Horn

Alarm Horn

Component location: In plenum chamber at front between E-box, right, and blower box.

Removing

- Switch off ignition and remove ignition key.

- Remove rubber seal - 1 - on plenum chamber cover.





- Remove plenum chamber cover - 2 -.

- Remove nut - 2 - for alarm horn (H12).





- Remove nut - 3 - for bracket - 1 -.

- Pull bracket out of blower box - arrow - and remove mounting from plenum chamber.

- Disconnect electrical harness connector and remove alarm horn from plenum chamber.

Installing

Install in reverse order of removal, observing the following:

- When installing bracket, observe rubber bushing for blower box.

Tightening Specifications