Sill Panel Cover

Sill Panel Cover






1 Sill panel cover

• Removing

- Open the expanding clip and remove it from the sill panel trim.

- Warm the adhesive surface carefully with a hot air blower.

- Peel off the sill panel trim in stages.


Adhesive surfaces on side member must be free of dust and grease.

• Installing

- When installing, secure in sill area with centering pin - arrow - and tip downward.

- Remove protective foil over pulling aid.

- Press side member trim firmly onto side member on adhesive bands.

- Press in grommet - 5 -, insert expanding clips - 6 - and engage.

2 Adhesive tape

• Pull off protective foil before installing.

3 Front cover strip

• Fastened with double-side adhesive tape.

4 Rear cover strip

• Fastened with double-side adhesive tape.

5 Grommet

6 Spreader clip