Diagram 116/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Oxygen Sensors (O2S) Behind Three Way Catalytic Converter (TWC)





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G130 - Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) Locations

G131 - Oxygen Sensor (O2S) 2 Behind Three Way Catalytic Converter (TWC) Locations

J364 - Auxiliary Heater Control Module

J393 - Comfort System Central Control Module Overview of Control Modules

J623 - Engine Control Module (ECM) Overview of Control Modules

SA7 - Fuse 7 (on fuse panel A) Overview of Fuses

T4a - 4-Pin Connector, black, oxygen sensor (O2S) 1 behind three way catalytic converter (TWC)

T4b - 4-Pin Connector, brown, oxygen sensor (O2S) 2 behind three way catalytic converter (TWC)

T10v - 10-Pin Connector, white, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T10y - 10-Pin Connector, black (Connector C), on comfort system control module

T17o - 17-Pin Connector, brown, connector station electronics box in left plenum chamber Overview of Connector Stations and Connectors

T94 - 94-Pin Connector, black (Connector B), on engine control module (ECM)

Z29 - Oxygen Sensor (O2S) Heater 1 (behind Three Way Catalytic Converter (TWC)

Z30 - Oxygen Sensor (O2S) Heater 2 (behind Three Way Catalytic Converter (TWC)

(D115) - Connection 13 (in engine compartment wiring harness)

* - Models with auxiliary heater

Previous Diagram 116/15 (Tracks 183-196)

Next Diagram 116/17 (Tracks 211-224)