Seat Heating Element

Seat Heating Element

Removing






- Separate the cover from the upholstery:

• Standard seat and folding seat - passenger seat. Refer to=> [ Seat Cover and Cushion, Standard, Comfort and Folding ] Seat Cover and Cushion, Standard, Comfort and Folding.

• Sport seat. Refer to => [ Seat Cover and Cushion, Sport Seat ] Seat Cover and Cushion, Sport Seat.

- Cut the electrical wire - 3 - off directly at the old backrest heating element - 2 -.

• The old seat heating element remains on the upholstery - 1 - and the new seat heating element is bonded over it.

• Ignore - A through D - and - arrows -.

Installation

- Align new heating element on backrest cushion.


• Make sure the new heating element is affixed to the old heating element.

• Remove the protective foil off the heating element in the affixing sequence.

• When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

- Bond the individual areas of the heating element in the sequence - A, B, C and D -.






- Route the connecting wires to the individual heating surfaces in the base of the gaps - arrows -.

- Pull the wire - 2 - through the slit in the cushion - 1 -.

Further installation is performed in the reverse order of removal.