Cylinder Head, Valvetrain - Fastener Tightening Specifications

Fastener Tightening Specifications






Left Timing Chain Cover, Tightening Specifications and Sequence






• Replace the bolts for the left timing chain cover.






Right Timing Chain Cover, Tightening Specifications and Sequence






• Replace the bolts for the right timing chain cover.






Lower Timing Chain Cover, Tightening Specifications and Sequence











Right Cylinder Head Cover, Tightening Specifications and Sequence

- Tighten the bolts to 9 Nm in the following sequence: - 1 to 12 -.






Oil Dipstick Guide Tube - Tightening Specifications

- Tighten the bolt - arrow - to 9 Nm.






Camshaft Guide Frame Tightening Specifications and Sequence






• The illustration shows the guide frame for the left cylinder head.

- Replace the guide frame bolts.

- Tighten the bolts in 3 steps in the following sequence: - 1 to 21 -:

- Install bolts by hand as far as the stop.

• The guide frame must be touching the entire contact surface of the cylinder head.

- Tighten to 8 Nm.

- Tighten an additional 90°.