Cover and Padding, Backrest With Cover or Storage Compartment

Cover and Padding, Backrest with Cover or Storage Compartment

Removing

- Remove the seat bench. Refer to => [ Bench Seat ] Bench Seat.

- Remove the backrest. Refer to => [ Backrest ] Backrest.

- Remove the headrests. Refer to => [ Headrest ] Headrest.

Split backrest right 2/3 with storage compartment or cover:

- Remove the center armrest. Refer to => [ Center Armrest ] Center Armrest.

- Remove the storage compartment (backrest cover with lock) or backrest cover. Refer to:

• => [ Lockable Armrest Storage Compartment ] Lockable Armrest Storage Compartment.

• => [ Backrest Trim ] Backrest Trim.

• => [ Backrest Cover ] Backrest Cover.

Continuation for Left and Right Backrest:






- Remove the retainer trim. Refer to:

• => [ Lock Trim, without Lock Cylinder ] Lock Trim, Without Lock Cylinder.

• => [ Lock Trim, with Lock Cylinder ] Lock Trim, With Lock Cylinder.

- Remove headrest guide. Refer to => [ Headrest Guide ] Headrest Guide.

- Unclip the plugs - 2 -.

1 Cover
3 Inner bracket

- Pry the upper retaining channel - 1 - out of the backrest shell - 3 -.






- Remove the molding - 2 - from the sides and bottom of the backrest shell - 3 -.

Split Backrest Right 2/3 with Storage Compartment or Cover:






- Pry the molding - 2 - out of the tabs - arrow - on the backrest shell - 1 -.

Continuation for Left and Right Backrest:

- Pry the cover over the inner bracket.

- Pry the cover over the outer bracket.

- Guide the release cable with the connector station through the slit in the cover.

- Remove the cover with upholstery from the backrest shell.

- Remove the upper and lower upholstery from the backrest shell.

Installing






Install in reverse order of removal. Note the following:

- Install headrest guide with button at left.

- Make sure the button - 2 - moves easily after installing the trim.