Windshield Washer System Assembly Overview

Windshield Washer System Assembly Overview






1 Screw

• Tightening sequence

2 Windshield Wiper Motor

• With wiper motor control module (J400)

• Removing and installing, refer to => [ Windshield Wiper Motor with Windshield Wiper Motor Control Module ] Windshield Wiper Motor With Windshield Wiper Motor Control Module

3 Screw

• Tightening sequence

4 Nut

• 17 Nm

5 Cap

6 Windshield Wiper Arm, Passenger's Side

• Different lengths, refer to the electronic parts catalog ETKA.

• Removing and installing, refer to => [ Windshield Wiper Arms ] Removal and Replacement

• Adjusting, refer to => [ Windshield Wiper Arms, Adjusting ] Adjustments

7 Windshield Wiper Blade, Passenger's Side

• Different lengths, refer to the electronic parts catalog ETKA.

• Replacing, refer to => [ Windshield Wiper Blades, Replacing ] Service and Repair

8 Windshield Wiper Blade, Driver's Side

• Different lengths, refer to the electronic parts catalog ETKA.

• Replacing, refer to => [ Windshield Wiper Blades, Replacing ] Service and Repair

9 Windshield Wiper Arm, Driver's Side

• Different lengths, refer to the electronic parts catalog ETKA.

• Removing and installing, refer to => [ Windshield Wiper Arms ] Removal and Replacement

• Adjusting, refer to => [ Windshield Wiper Arms, Adjusting ] Adjustments

10 Cap

11 Nut

• 17 Nm

12 Screw

• Tightening sequence

13 Water Drain Channel

Windshield wiper motor, tightening specifications and sequence





- Tighten the bolts in - 1, 2, 3 - sequence in 2 stages as follows:

- Install by hand as far as the stop.

- Tighten to 8 Nm.