Modular Wiring Routing Versions

Modular Wiring Routing Versions

There are two versions of modular wiring routing:

• Modular Light

• Modular.

Modular Light Wiring Routing

A characteristic of the Modular Light versions is that only the side airbag wiring harness leads directly to the connector station in the vehicle floor. There is no additional connector (intermediate coupling) present in the side airbag wiring harness.

All other electrical or electronic components, for example, seat occupied recognition, electrically adjustable headrests, seat and backrest heating, electrical backrest adjustment, etc., have an additional connector (intermediate coupling) - 1 -, - 2 -, - 3 - on the underside of the seat pan upper frame.






4 Clip

All wiring harnesses are routed in a two-part corrugated pipe in the seat/connector station area.

Modular Wiring Routing

A characteristic of Modular wiring routing is that all wiring harnesses for electrical or electronic components, for example, side airbag, seat occupied recognition, bladder system, electrically adjustable headrests, seat and backrest heating, electrical backrest adjustment, etc., lead directly to the connector station in the vehicle floor. There are no additional connectors (intermediate couplings) in the electrical or electronic component wiring harnesses.

All wiring harnesses are routed in a two-part corrugated pipe in the seat/connector station area.