Four-Way Lumbar Support Assembly Overview

Four-Way Lumbar Support Assembly Overview

• The cover with upholstery in the backrest is not shown for clarity purposes.






1 Four-way lumbar support

• Removing and Installing, refer to => [ Four-Way Lumbar Support ] Four-Way Lumbar Support

2 Release cable

• With entry assist

• Coupe only

3 Clip

• For release cable guide => [ (Item 4) Release cable ]

4 Release cable

• For lumbar support height adjustment

• can only be replaced with Driver Seat Lumbar Support Height Adjustment Motor (V129) or Front passenger Seat Lumbar Support Height Adjustment Motor (V130)

5 Driver Seat Lumbar Support Height Adjustment Motor (V129) or Front passenger Seat Lumbar Support Height Adjustment Motor (V130)

• Removing and Installing, refer to => [ Lumbar Support Height Adjustment Motors V129 and V130 ] Lumbar Support Height Adjustment Motors V129 and V130

6 Backrest frame

7 Rivet

• Rivet using special pop rivet pliers (V.A.G 1753A)

• before riveting, a plastic washer must be placed between lumbar support and backrest frame => [ (Item 10) Plastic washer ]

8 Release cable

• For lumbar support curvature adjustment

• Can only be replaced with Driver Seat Lumbar Support Curvature Adjustment Motor (V125) or Front Passenger's Seat Lumbar Support Curvature Adjustment Motor (V126)

9 Clip

10 Plastic washer

• Between four-way lumbar support and backrest frame

11 Retaining plate

12 Retainer

13 Cable tie

14 Driver Seat Lumbar Support Curvature Adjustment Motor (V125) or Front Passenger's Seat Lumbar Support Curvature Adjustment Motor (V126)

• Removing and Installing, refer to => [ Lumbar Support Curvature Adjustment Motors V125 and V126 ] Lumbar Support Curvature Adjustment Motors V125 and V126