Front Seat Covers and Padding
Headrest Cover and Upholstery with Locking Mechanism
Special tools, testers and auxiliary items required
• Trim removal wedge (3409)
Removing
- Remove headrests.
• Manual front seat, refer to => [ Headrests with Locking Mechanism ] Headrests with Locking Mechanism
• Power front seat, refer to => [ Headrests with Locking Mechanism ] Headrests with Locking Mechanism.
- Disengage clamping strips - 1 - and - 2 - from guide channel - arrow B - by prying out with Trim Removal Wedge (3409).
- Disengage sill panel strips - 4 - from guide channel - arrow A - by prying with Trim Removal Wedge (3409).
- Remove cover - 3 - with upholstery - 5 - from headrest support.
6 Headrest support guide tube
- Remove the padding - 2 - from the cover - 1 -.
Installation
- Insert cushion - 2 - into cover - 1 - and make sure it fits properly.
- Insert headrest mount in upholstery with cover.
- Press retaining strips - 4 - firmly into guide channel - arrow A - and check by pulling.
- Press retaining strips - 1 - and - 2 - firmly into guide channel - arrow B - and check by pulling.
- Make sure the cover lies on the upholstery without any wrinkles and without seam markings.
Further installation is performed in the reverse order of removal.