Diagram 36/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Tire Pressure Monitoring Control Module, Tire Pressure Monitoring Display Indicator Lamp, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Component Locations

J502 - Tire Pressure Monitoring Control Module Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations

K220 - Tire Pressure Monitoring Display Indicator Lamp

SC12 - Fuse 12 (on fuse panel C)

SC17 - Fuse 17 (on fuse panel C)

SD3 - Fuse 3 (on fuse panel D) Fuses (SD) on Main Fuse Carrier

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T20h - 20-Pin Connector, red, on tire pressure monitoring control module 2

T32 - 32-Pin Connector, blue, on instrument cluster control module

(B299) - Plus Connection 3 (30) (in main wiring harness)

(B300) - Plus Connection 4 (30) (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B398) - Comfort System CAN-Bus High Connection 2 (in main wiring harness)

(B406) - Comfort System CAN-Bus Low Connection 1 (in main wiring harness)

(B407) - Comfort System CAN-Bus Low Connection 2 (in main wiring harness)

^ - CAN-Bus (data wire)

* - Main fuse panel, in right rear luggage compartment on battery

Next Diagram 36/3 (Tracks 15-28)