Rear Lid Trim Upper Panel

Rear Lid Trim Upper Panel

Special tools, testers and auxiliary items required

• Pry Lever (80 - 200)

Removing






- Remove the lower rear lid trim panel. Refer to => [ Rear Lid Lower Trim Panel ] Rear Lid Lower Trim Panel.

- First unclip the upper rear lid trim panel - 1 - using the (80 - 200) from the rear lid - arrows A -.

- Then unclip the upper rear lid trim panel using the (80 - 200) from the rear lid - arrows B - and remove it.

Installing






Install in reverse order of removal. Note the following:

• If the trim clamps - 2 - remain in the rear lid mounting points, remove them and insert them in the trim.

• Check clamps for damage or deformation, replace if necessary.

- Make sure all the rubber buffers - 1 - are in the trim.

- Insert the trim panel first behind the side window frame in the rear lid.

- First clip the rear lid trim panel at the top and then down the sides.