Radiator Grille

Radiator Grille

Removing






- Remove the bumper cover.

- Remove the impact absorber. Refer to => [ Impact Absorber ] Impact Absorber.

- Remove the bolts - 3 -.

- Free up the parking aid sensor electrical wiring harness on the radiator grille, if applicable, by disconnecting the cable ties - 1 -.

- Remove the electrical connector - 2 - from the bracket.

- To do this,, press the release in the - direction of arrow A - and remove the electrical connector - 1 - from the bracket - 2 - in the - direction of arrow B -.






- Remove the bolts - arrows -.

- Remove the reinforcing bars - 1 through 3 -.






- Disconnect the electrical connectors - 5 - and - 6 - on the parking aid sensors.

- Remove the bolts - arrows - and the radiator grille - 4 - from the bumper cover.

- If necessary, removing the parking aid sensor mount by releasing the clips and removing the mount.

Installing

• Tightening specifications, refer to => [ Radiator Grille Assembly Overview ] Radiator Grille.

Install in reverse order of removal.

- Install the impact absorber. Refer to => [ Impact Absorber ] Impact Absorber.

- Install the bumper cover.