Digital Compass, Calibrating

Digital Compass, Calibrating

It is necessary to calibrate the digital compass if:

• Compass directions are not correct.

• The letter "C" instead of a direction will appear or the display will be blank.

• A new automatic dimming interior rearview mirror (Y7) is installed.

The digital compass may also need to be calibrated if:

• the vehicle battery was reconnected after being disconnected for an extended period.

• a new audio system or audio system component was installed.

Digital Compass, Calibrating:






- Switch on ignition.

• The letter "C" must appear in the display - 1 -.

- If the letter "C" does not appear, press button - 2 - for 9 to 12 seconds until the "C" appears in the compass display.

- Drive in a circle two to three times at about 10 km/h (5 mph) until a direction is shown in the compass display.

- The interior rearview mirror automatic dimming function is reactivated after the calibration is complete => [ Automatic Dimming Interior Rearview Mirror (Y7), Automatic Dimming Function, Switching On and Off ] Automatic Dimming Interior Rearview Mirror (Y7), Automatic Dimming Function, Switching On and Off.