Front Coolant Pipe

Front Coolant Pipe

Special tools, testers and auxiliary items required

• Hose Clamps Up to 25 mm Dia. (3094)

• Hose Clip Pliers (V.A.G 1921)

Removing






• Lay a cloth below the coolant pipe to catch escaping coolant.

- Remove the bolts - 1 and 2 - and move the front coolant pipe upward.

- Disconnect and remove the coolant hoses - arrows - with (3094).

Installing

• Tightening specifications, refer to => [ Coolant Pipes and After-Run Coolant Pump (V51) Overview ] Coolant Pipes and After-Run Coolant Pump (V51) Overview.

Install in reverse order of removal. Note the following:

• Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the Parts Catalog.

- Check the coolant level => [ Check the coolant level. ] Service and Repair.