Oil Pressure Switch (F22),

Oil Pressure Switch (F22),

Removing

• Place a cloth under the accessory assembly bracket to collect leaking engine oil.






- Disconnect the connector - 1 - from the oil pressure switch (F22).

- Remove the oil pressure switch - 2 -.

Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Oil Filter, Oil Cooler and Oil Pressure Switch Overview ] Oil Filter, Oil Cooler and Oil Pressure Switch Overview.

• Replace the seal.

• To prevent coolant loss, insert the new oil pressure switch in the connecting pieces immediately.

- Check the oil level.