Rear Left Belt Latch

Rear Left Belt Latch

Removing






- Remove the bench seat. Refer to => [ Bench Seat ] Bench Seat.

- Remove the bolt - 3 - and remove the belt latch - 1 - and cover - 2 -.

Installing

- Replace the belt latch bolt.

- Install the bolt - 3 - into the seat belt latch - 1 -.

- Slide the sealing ring over the bolt thread from underneath.

Installation is performed in reverse order of removal, noting the following:

- Align the seat belt latch to the direction of travel when bolting it on.

• The recesses - arrows - on the bolting surface of the seat belt latch must lie over the anti-twist mechanisms on the floor panel.

Tightening specifications, refer to => [ Rear Belt Latch Overview ] Rear Belt Latch Overview.