Rear Window Wiper Motor (V12)

Rear Window Wiper Motor (V12)

Removing

- Remove the wiper arm. Refer to => [ Wiper Arm ] Wiper Arm.

- Remove the lower luggage compartment lid trim.

- Disconnect the electrical connector - 2 -.






- Release the securing clip - arrow A - and remove the washer fluid line - 3 - from the spray nozzle connecting pipe.

- Remove the nuts - B arrows - and the rear window wiper motor - item 1 -.

Installing

• Tightening specification, refer to => [ Wiper and Motor Overview ] Wiper and Motor Overview.

Install in reverse order of removal, observing the following:

• Washer fluid hose must engage audibly into nozzle connection.

- Install the lower rear lid trim.

- Adjust the wiper arm. Refer to => [ Wiper Arm, Adjusting ] Wiper Arm, Adjusting.