Left Retaining Plate With Left Footwell Door Motor (V108) and Left Center Vent Motor (V110)
Left Retaining Plate with Left Footwell Door Motor (V108) and Left Center Vent Motor (V110)
- Remove the retaining plate together with the Left Footwell Door Motor and the Left Center Vent Motor. Refer to => [ Left Retaining Plate with Left Footwell Door Motor (V108) and Left Center Vent Motor (V110) ] Left Retaining Plate With Left Footwell Door Motor (V108) and Left Center Vent Motor (V110).
• The mounting plate with the Left Footwell Door Motor and the Left Center Vent Motor is installed only on vehicles equipped with the "Comfort" A/C system.
• Currently in this vehicle, all motors are identical in construction. During the basic setting, the control motors are assigned and adapted corresponding to the switching sequence of the wiring. If this sequence does not conform with the specification, the control motors will adapt incorrectly and the door control will be wrong. Refer to => [ A/C Control Motor Block Diagram ] A/C Control Motor Block Diagram.
• The control motor shaft does not have a stop; therefore the shaft of these control motors can be inserted into the cam plate in any position.
• Depending on the production date, there are different versions of the levers and connections on the A/C unit. Refer to => [ Air Conditioner, Levers and Connecting Elements ] Air Conditioner, Levers and Connecting Elements and the Electronic Parts Catalog (ETKA).
1 Screw
2 Left Vent Adjustment Motor (V110)
3 Mounting Plate
4 Left Footwell Door Motor (V108)
5 Connecting Rod
• To the door for the left center vent
6 Connecting Rod
• To the door for the left dash panel vent
7 Actuating Lever
8 Connecting Rod
• To the left rear footwell vent door
9 Connecting Rod
• To the door for the left front footwell
10 Cam Disk
• On the Left Center Vent Motor (V110)
11 Actuating Lever
12 Actuating Lever
13 Cam Disk
• On the Left Footwell Door Motor (V108)
14 Cam Plate Stop
• When reassembling, pay attention to the correct position of the cam plate => [ Installing ] Left Retaining Plate With Left Footwell Door Motor (V108) and Left Center Vent Motor (V110)
15 Cam Plate Stop