Ride Height Sensor: Service and Repair

Left Front Body Acceleration Sensor (G341) and Right Front Body Acceleration Sensor (G342)

Special tools, testers and auxiliary items required

• Torque Wrench (V.A.G 1410)

Removing

- Remove the wheel.

- Remove the front wheel housing liner.

- Release and disconnect the connector - 2 -.

- Remove the nut - 1 - and sensor - 3 -.






Installing

Install in reverse order of removal. Note the following:

- When installing, always pay attention to the installation position of the sensor.

- Install the sensor as illustrated.






- Tighten the nuts - 1 - to 5 Nm.