Diagram 120/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Locations

J428 - Distance Regulation Control Module Locations

J525 - Digital Sound System Control Module Overview of Control Modules

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

T16 - 16-Pin Connector, Diagnostic Connector

T17e - 17-Pin Connector, red, connector station A-pillar, left Overview of Connector Stations and Connectors

T20p - 20-Pin Connector, black, on data bus on board diagnostic interface

T32 - 32-Pin Connector, grey, on instrument cluster

T32f - 32-Pin Connector, black (Connector A), on digital sound system control module

T46b - 46-Pin Connector, right CAN separating connector

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B444) - On Board Diagnostic (OBD) Connection 1 (in main wiring harness) (Ring break Diagnosis)

(B445) - On Board Diagnostic (OBD) Connection 2 (in main wiring harness) (Ring break Diagnosis)

- CAN-Bus (data wire)

* - Models with distance control

# - Wake Up Wire

♦ - FOC - Fibre Optic Conductor => Wiring Diagram Infotainment-Data Bus (Most-Ring)

Previous Diagram 120/2 (Tracks 1-14)

Next Diagram 120/4 (Tracks 29-42)