Diagram 138/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Lane Change Assistance Control Module, Fuse





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J329 - Power Supply Relay (terminal 15) Overview of Relay Carrier

J533 - Data Bus On Board Diagnostic Interface Overview of Control Modules

J769 - Lane Change Assistance Control Module Lane Assist System Overview

SC4 - Fuse 4 (on fuse panel C) Overview of Fuses

T12v - 12-Pin Connector, black, on lane change assistance control module

T12x - 12-Pin Connector, black, in luggage compartment, right

T20p - 20-Pin Connector, black, on data bus on board diagnostic interface

(51) - Ground Connection (in luggage compartment, right) Overview of Ground Connections in Interior of Vehicle

(368) - Ground Connection 3 (in main wiring harness)

(B108) - CAN-Bus Extended High Connection 1 (in main wiring harness)

(B109) - CAN-Bus Extended Low Connection 1 (in main wiring harness)

(B163) - Plus Connection 1 (15) (in interior wiring harness)

(B273) - Plus Connection (15) (in main wiring harness)

- CAN-Bus (data wire)

* - 9-Pin relay carrier, behind driver's storage compartment

Next Diagram 138/3 (Tracks 15-28)