Supercharger Coolant Pipes

Supercharger Coolant Pipes

Special tools, testers and auxiliary items required

• Hose Clamps Up to 25 mm Dia. (3094)

• Drip Tray (VAS 6208)

• Hose Clip Pliers (VAS 6362)

Removing

- Remove the front engine cover - 1 - upward.






- Remove the noise insulation, to do this, loosen the fasteners - 1, 2, arrow -.







Risk of scalding due to hot steam and hot coolant.

• The coolant system is under pressure when the engine is warm.

• Cover the coolant reservoir cap with a cloth and then open it slowly to release the pressure in the system.

- Open the coolant reservoir cap.

- Place the (VAS 6208) under engine.

- Open the clamps - arrows - and disconnect the coolant hoses with the (3094) and remove them from the coolant pipes on the supercharger.






• Ignore - 1 -.

- Remove the bolts - 1 - and - 2 - and the coolant pipes.






Installing

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to => [ Coolant Pipes Overview ] Coolant Pipes Overview.

• Replace the seals

• Secure all hose connections with hose clamps appropriate for the model.

- Fill with coolant => [ Filling ] Procedures.

- Install the noise insulation.