Crankshaft, Cylinder Block - Fastener Tightening Specifications
Fastener Tightening Specifications
Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications and Sequence
- Tighten the bolts - arrows - in a diagonal sequence in stages to 9 Nm.
Locking Bolt "TDC" Mark Crankshaft, Tightening Specification
• Replace sealing ring.
- Tighten the locking bolt - arrow - to 14 Nm.
Installing Guide Frame
• Replace bolts which have been tightened to an additional torque.
- Insert the long bolts in the inner row of the guide frame.
- Tighten the bolts in 3 steps according to the tightening sequence:
Oil Spray Jet for Piston Cooling
1. Insert the bolt with locking compound. Tighten to 9 Nm.
2. Oil spray jet with spray nozzle valve