Source Volume Automatic Correction

Source Volume Automatic Correction

Different audio sources send different strength input signals to the digital sound system control module (J525). This is due, for example, to different CDs or radio stations being used. The output volume changes with the different audio sources. The signal strength of the different audio source is controlled by the digital signal processor during the automatic correcting of the source volume so that the customer cannot hear a difference in volume when, for example, switching from listening to the radio to listening to a CD.

• On the Basic and Standard amplifiers the digital sound system control module is integrated with the radio (R).






1 - Audio Source 1 Input Signal

2 - Digital Signal Processor

3 - Equalized Output Signal

4 - Audio Source 2 Input Signal