Rear Seat Backrest Heating Element

Rear Seat Backrest Heating Element

Removing

- Remove the cover and cushion on the rear seat backrest. Refer to => [ Rear Seat Backrest Cover and Cushion ] Rear Seat Backrest Cover and Cushion.

- Cover, rear seat backrest, separating from upholstery. Refer to => [ Rear Seat Backrest Cover, Removing from Cushion ] Rear Seat Backrest Cover, Removing From Cushion.

- Cut the electrical wire - 3 - off directly at the old rear seat backrest heating element - 2 -.






• The old rear seat backrest heating element remains on the upholstery - 1 - and the new rear seat backrest heating element is bonded over it.

• Ignore - arrow -.

Installing

- Adjust the new rear seat backrest heating element - 2 - on cushion.

• Make sure the new rear seat backrest heating element is affixed to the old heating element.

• Remove the protective films in the bonding sequence for the heating element area.

• When removing the protective film, make sure the heating element is not damaged and that it is attached without wrinkles.

- Route the connecting wires to the individual heating surfaces in the base of the gaps - arrow - without crossing.

- Pull the wire - 3 - through the slit in the upholstery - 1 -.

Further installation is performed in the reverse order of removal.