Front Interior/Reading Lamp LED

Front Interior/Reading Lamp LED

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)

Removing






- Remove the front interior/reading lamp. Refer to => [ Front Interior Lamp/Reading Lamp ] Front Interior Lamp/Reading Lamp.

- Carefully pry the diffusion lens - 2 - using the (3409) out of the socket - 1 -.

- If equipped, remove the garage door opener control head (E284) - item 3 -. Refer to => [ Garage Door Opener Control Head (E284) ] Garage Door Opener Control Head (E284).

• If the LED malfunctions, the bulb socket must be replaced.

Installing

Install in reverse order of removal, observing the following:

- Press the interior/reading lamp lens on until it engages.

- Insert interior/reading lamp into roof cutout and clip.