iPod Baseplate, Connections

iPod Baseplate, Connections

• Unlisted connector terminals are not assigned.

Black 12-pin multi-pin harness connector (T12a)





1 CD data out to radio/navigation system with CD drive control module, radio/navigation display control module
2 CLK out to radio/navigation system with CD drive control module, radio/navigation display control module
3 Terminal 31
4 Data in from radio/navigation system with CD drive control module, radio/navigation display control module
6 Permanent positive from radio/navigation system with CD drive control module, radio/navigation display control module
7 Right signal to radio/navigation system with CD drive control module, radio/navigation display control module, satellite radio
8 Positive switched from radio/navigation system with CD drive control module, radio/navigation display control module
9 Signal ground from radio/navigation system with CD drive control module, radio/navigation display control module, satellite radio
10 Left signal to radio/navigation system with CD drive control module, radio/navigation display control module, satellite radio
11 TOC Check Control (not used)
12 Terminal 58 (not used)