Interior Moulding / Trim: Service Precautions

Contact Corrosion

Contact corrosion can occur if incorrect fasteners (bolts, nuts, washers, etc.) are used.

For this reason, only connecting elements with a special surface coating are installed.

Furthermore, all rubber or plastic and adhesive are made of non-conductive materials.

If there are doubts as to whether parts can be reused or not, use new parts. Refer to Parts Catalog.

• It is recommended to use only original replacement parts as they have been tested and are compatible with aluminum.

• It is recommended to use Audi accessories.

• Warranty does not cover contact corrosion damage.