Seat Pan Assembly Overview

Seat Pan Assembly Overview

• The upper and lower seat pan frames can be separated and replaced individually on a power front seat.

• When removing seat pan, ensure bushings in bearing points (upper and lower frame threaded connection) are not damaged. These bushings cannot be replaced with workshop materials.






1 Screw, self-locking

• 29 Nm

• Quantity: 3

• Replacing

• Threaded holes for screws must always be cleaned (for example, with thread cutter)

2 Upper seat pan frame

• Removing and Installing, refer to => [ Seat Pan, Disassembling and assembling ] Seat Pan, Disassembling and assembling

3 Bushing

• Inserted in all bracket locations

• Cannot be replaced with workshop materials

• If the bushing is damaged, assembly part must be replaced, allocation => Parts Catalog

4 Lower seat pan frame

• Removing and Installing, refer to => [ Seat Pan, Disassembling and assembling ] Seat Pan, Disassembling and assembling

5 Bolt

• 27 Nm

• Always replace if removed

• Before installing new bolts, clean threads on seat pan nuts

6 Driver Seat Height Adjustment Motor (V245) or Front Passenger's Seat Height Adjustment Motor (V246)

• Removing and Installing, refer to => [ Seat Height Adjustment Motor V245 and V246 ] Seat Height Adjustment Motor V245 and V246

7 Seat forward/back adjustment motor (V288)

• Cannot be removed and installed with workshop materials

• Stays on the lower seat pan frame => [ (Item 4) Lower seat pan frame ]

8 Driver seat angle adjustment motor (V243) or front passenger seat angle adjustment motor (V244)

• Removing and Installing, refer to => [ Driver Seat Angle Adjustment Motor V243/V244 ] Driver Seat Angle Adjustment Motor V243/V244

9 Screw, self-locking

• For the correct tightening specifications, refer to => [ (Item 3) Screw, self-locking ] Seat Angle Adjustment Motor V243/V244 Assembly Overview

• Replacing

• Threaded holes for screws must always be cleaned (for example, with thread cutter)