Seat Height Adjuster

Seat Height Adjuster

Special tools, testers and auxiliary items required

• Torque wrench (V.A.G 1410)






• Engine and transmission holder (VAS 6095)






• Fixture for seat repair (VAS 6136)











1 Retaining clip

2 Seat height adjustment handle lever

3 Seat height adjuster

Removing

- Remove the seat. Refer to => [ Seat ] Seat.

- Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).

- Attach the front seat to the fixture for seat repair (VAS 6136).

- Remove backrest and front seat pan. Refer to => [ Front Backrest and Seat Pan ] Front Backrest and Seat Pan.

- Remove nut - 5 -.

- Remove bolts - 7 - (quantity: 2).

- Remove the bolt - 4 -.

- Remove seat height adjustment unit - 3 - and retaining plate - 6 -.

Installation

Install in reverse order of removal. Note the following:

- Make sure the retaining plate - 6 - makes contact on backrest frame at - position of arrow -.

4 Bolt

• Tightening specification 8 Nm

5 Nut

• Tightening specification 12 Nm

6 Retaining plate

7 Screws, (quantity: 2)

• Tightening specification 8 Nm