Seat Forward/Back, Angle, Height and Backrest Adjustment Switches V288/V243/V244/V245/V246/V45/V46

Seat Forward/Back, Angle, Height and Backrest Adjustment Switches V288/V243/V244/V245/V246/V45/V46

Removing

- Remove sill side trim - 3 -. Refer to => [ Sill Side Trim ] Sill Side Trim.






- Disconnect connectors - 6 - and - 7 -.

- Remove seat and backrest adjustment actuators - 4 - and - 5 -. Refer to => [ Seat and Backrest Adjustment Actuator Assembly Overview ] Seat and Backrest Adjustment Actuator Assembly Overview.

- Remove bolts - 1 - (quantity: 3).

- Remove seat fore and aft, inclination, height and backrest adjustment switch - 2 -.

Installation

Install in reverse order of removal. Note the following:

- Route wires as close to couplings - 6 - and - 7 - as possible.

For the correct tightening specifications, refer to => [ Seat Adjustment Switches, V288/V243/V244/V245/V246/V45/V46 Assembly Overview ] Seat Adjustment Switches, V288/V243/V244/V245/V246/V45/V46 Assembly Overview