Diagram 9/5 (Tracks 43-56)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


ESP sensor unit, Brake booster vacuum sensor, ABS control module, ABS hydraulic unit





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

G200 - Transverse acceleration sensor Locations

G202 - Rotation rate sensor Locations

G251 - Longitudinal acceleration sensor Locations

G419 - ESP sensor unit Locations

G483 - Brake booster vacuum sensor Locations

J104 - ABS control module Component Locations

N55 - ABS hydraulic unit Locations

N99 - Right front ABS inlet valve

N100 - Right front ABS outlet valve

N101 - Left front ABS inlet valve

N102 - Left front ABS outlet valve

N133 - Right rear ABS inlet valve

N134 - Left rear ABS inlet valve

N135 - Right rear ABS outlet valve

N136 - Left rear ABS outlet valve

N225 - Driving dynamics regulation switch valve 1

N226 - Driving dynamics regulation switch valve 2

N227 - Driving dynamics regulation high pressure switch valve 1

N228 - Driving dynamics regulation high pressure switch valve 2

T47 - 47-pin connector Locations Locations

* - Only for vehicles with all wheel drive

*2 - Depending on equipment

*3 - Data bus wire (CAN bus)

Previous Diagram 9/4 (Tracks 29-42)

Next Diagram 9/6 (Tracks 57-70)