Diagram 57/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Headlamp Range Control Module, CAN-Bus Wiring





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J250 - Electronic Damping Control Module Component Locations

J431 - Headlamp Range Control Module Component Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations

T20d - 20-Pin Connector, black, on data bus on board diagnostic interface

T26a - 26-Pin Connector, black, on headlamp range control module

T47a - 47-Pin Connector, on electronic damping control module

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B384) - Powertrain CAN-Bus High Connection 2 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B391) - Powertrain CAN-Bus Low Connection 2 (in main wiring harness)

^ - CAN-Bus (data wire)

* - Models with electronic damping

Previous Diagram 57/7 (Tracks 71-84)