Diagram 6/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

A - Battery Harness Locations

B - Starter

C - Generator

J234 - Airbag control module Component Locations

J519 - Vehicle electrical system control module Component Locations

J533 - Data bus on board diagnostic interface Component Locations

J681 - Terminal 15 power supply relay 2 Relay Carrier on Vehicle Electrical System Control Module, from June 2009

N253 - Battery interrupt igniter Fuses (SD) on Main Fuse Carrier Harness Locations

SC7 - Fuse 7 (on fuse panel C)

SC10 - Fuse 10 (on fuse panel C)

T2b - Double connector

T20d - 20-pin connector Locations

T75 - 75-pin connector Locations

(637) - Airbag control module ground connection Locations

(B163) - Positive connection 1 (15) (in interior wiring harness)

(B280) - Positive connection 4 (15a) (in main wiring harness)

(B383) - Powertrain CAN bus high connection 1 (in main wiring harness)

(B384) - Powertrain CAN bus high connection 2 (in main wiring harness)

(B390) - Powertrain CAN bus low connection 1 (in main wiring harness)

(B391) - Powertrain CAN bus low connection 2 (in main wiring harness)

* - Refer to applicable standard equipment wiring diagram

*2 - Main fuse box in the right rear luggage compartment, at the battery

*3 - From June 2009

*4 - Through May 2009

*5 - Data bus wire (CAN bus)

Next Diagram 6/3 (Tracks 15-28)